Skip to main content
📞 (06) 355 4479  Â·  24/7 emergency service  Â·  ★★★★★ 4.8 Google reviewsSummer’s coming ☀ Stay cool with a new heat pump, and keep your chillers ready for the heat

Water Cooler & Filtration Servicing

Chillmax technician servicing a water cooler

Why Regular Servicing Matters

A water cooler and its filtration system work together to deliver clean, safe drinking water. If either one is neglected, water quality can drop quickly. Regular servicing keeps both working as they should.

1. Preventing Biofilm (Bacterial Build-up)

  • The issue: Bacteria can enter a cooler from the air or from hands touching the taps. Over time they form biofilm, a slimy layer that builds up inside tanks and pipes.
  • Our service: We sanitise the cooler with food-safe products to remove biofilm, which a simple wipe-down can’t do.

2. Replacing Filters on Time

  • The issue: Filter cartridges have a limited life. Once they’re full, they stop removing contaminants such as chlorine, sediment and odours, and water flow can slow down.
  • Our service: We replace filters at the recommended intervals so your water stays clean, fresh and flowing well.

3. Stopping Algae Growth

  • The issue: Coolers placed in direct sunlight, especially bottled units, can grow algae in the reservoir.
  • Our service: We deep-clean the reservoir and advise on the best location for your unit.

4. Protecting Your Equipment

  • Less wear: Blocked filters make the system work harder, which puts strain on pumps and cooling components.
  • Scale build-up: Minerals can coat heating and cooling parts, making the unit use more power.
  • Our service: We descale and clean the cooling coils to help lower running costs and extend the life of your unit.

Systems We Service

  • Water Coolers
  • Water Fountains
  • Water Filtration Systems
  • Water Purification Systems
Our water cooler and filtration servicing covers both the dispenser and the filter system. Here’s what’s included:

1. Water Cooler (Dispenser)

  • Reservoir sanitising: We flush the internal tank with a food-safe sanitiser to remove biofilm and bacteria.
  • Tap cleaning: Taps are removed, cleaned and sanitised, including the internal threads where scale and mould can build up.
  • Baffle cleaning: We clean the plate inside the tank that separates the hot and cold water.
  • Line flush: We flush the internal lines with fresh water to clear any sanitiser and stagnant water.

2. Filtration & Purification System

  • Filter replacement: We replace sediment and carbon filters, usually every 6 to 12 months depending on water quality and usage.
  • Housing sanitising: We clean and sanitise the filter housings before fitting new cartridges.
  • UV system check: If your system has a UV lamp, we check the lamp’s life and clean the quartz sleeve.
  • Pressure tank check (RO systems): For reverse osmosis systems, we check and adjust the storage tank pressure for steady flow.

3. General & Safety Checks

  • Condenser coil cleaning: We clean the cooling coils at the back of the unit so it runs efficiently and keeps water cold.
  • Leak check: We inspect all fittings and tubing for wear or leaks.
  • Drip tray cleaning: We clean and sanitise the drip tray and check the drain line, if fitted.
  • Thermostat check: We check the heating and cooling are switching on and off correctly, and visually inspect the power lead.